You are here:

Commercial Building Inspection Checklist (Free Template)

An inspection checklist in progress in Inspect it, showing completion, photos and findings
Share

This commercial building inspection checklist covers the routine condition inspection of an office, retail or mixed-use building: 60 checks, grouped the way you would walk the site.

Use it for monthly or quarterly walk-rounds. It is a condition and housekeeping checklist, not a structural survey and not a statutory inspection. Mark each line pass or fail, add a note and a photo for every fail, and give each fail an owner before you leave the building.

Print this checklist

How to use this commercial building inspection checklist

  • Start outside and at the top. Roof, then facades, then work down and in.
  • One photo per fail, with something for scale.
  • Do not write “OK” on a line you did not check. Mark it not inspected and say why.

The checklist

1. Site and exterior

CheckPassFailNotes
Paths, steps and ramps level, no trip hazards☐☐
Car park surface, markings and lighting in order☐☐
Boundary fences and gates secure☐☐
External lighting working☐☐
Signage present and legible☐☐
Drains and gullies clear, no standing water☐☐
Waste area tidy, bins closed and away from the building☐☐
Landscaping clear of the facade and of sight lines☐☐

2. Roof and rainwater

CheckPassFailNotes
Roof covering intact, no blisters, splits or slipped units☐☐
Flashings and parapet copings secure☐☐
Outlets and gutters clear☐☐
Downpipes connected and running☐☐
Rooflights uncracked and sealed☐☐
Roof plant fixed down, no corrosion at bases☐☐
Safe access in place: ladders, hatches, anchors☐☐
No ponding more than 48 hours after rain☐☐

3. Facade, windows and doors

CheckPassFailNotes
No new cracks in masonry, render or cladding☐☐
Sealant at joints and around frames intact☐☐
Windows open, close and lock☐☐
No failed double glazing units☐☐
Entrance doors close and latch on their own☐☐
Automatic doors operate and sensors respond☐☐
Canopies and fixed signage secure☐☐
No staining that indicates leaks☐☐

4. Structure and interior fabric

CheckPassFailNotes
No new cracks in walls, ceilings or floors☐☐
No water stains on ceilings☐☐
Floors level and finishes secure☐☐
Stairs, nosings and handrails firm☐☐
Suspended ceiling tiles in place☐☐
Walls free of damp and mould☐☐
Internal doors operate, ironmongery complete☐☐
Loading limits observed in storage areas☐☐

5. Fire safety

CheckPassFailNotes
Escape routes clear full width☐☐
Final exits open without a key☐☐
Fire doors close fully and are not wedged☐☐
Extinguishers in place, gauge in green, in date☐☐
Alarm panel showing normal☐☐
Call points and detectors unobstructed☐☐
Emergency lighting charge indicators lit☐☐
Fire action notices displayed☐☐

6. Mechanical and electrical

CheckPassFailNotes
Plant rooms locked, clean and free of storage☐☐
No leaks at pumps, valves or pipework☐☐
Boiler or heat substation running without faults☐☐
Ventilation running, filters in date☐☐
Distribution boards closed, labelled and unobstructed☐☐
No overloaded sockets or damaged cables☐☐
Lighting working in all circulation areas☐☐
Meter readings taken and compared with last visit☐☐

7. Water and sanitary

CheckPassFailNotes
Hot water reaches temperature at outlets☐☐
No leaks under sinks or in risers☐☐
Toilets flush and refill☐☐
Little-used outlets flushed☐☐
Washrooms clean and stocked☐☐
Floor drains clear and trapped☐☐

8. Lifts and common areas

CheckPassFailNotes
Lift car clean, lit and level at landings☐☐
Lift alarm button works☐☐
Reception and lobbies clean and undamaged☐☐
Corridors free of storage☐☐
Notice boards and wayfinding current☐☐
Accessible routes and facilities usable☐☐

Print this checklist

What to do with the fails

A checklist with twelve fails and no follow-up is a record that you knew. For each fail, write down who will fix it and by when, and check it first on the next visit. Our guide on how to write a building inspection report shows how to rate severity and present the action list.

A failed check from a commercial building inspection checklist becomes a repair task in Inspect it, with the photo attached.
In Inspect it, a failed check becomes a repair task with the photo attached.

Run it in the app instead

This commercial building inspection checklist is in the Inspect it library, with more than 900 other templates. On a phone, each line takes a tap, photos attach to the line they belong to, and the report is written when you finish. Read the building inspection software guide to see what that looks like, or pair this list with the fire safety inspection checklist and the facility inspection frequency guide.

Frequently asked questions

What is included in a commercial building inspection checklist?

Site and exterior, roof and rainwater goods, facade, windows and doors, internal fabric, fire safety, mechanical and electrical services, water and sanitary systems, lifts and common areas.

How often should a commercial building be inspected?

A routine condition walk-round is commonly done monthly or quarterly, with a fuller survey once a year. Statutory inspections of lifts, electrical and fire systems follow national rules.

Can I use this checklist for free?

Yes. Print this page or copy the checklist into your own form. The same template is available in the Inspect it app, which adds photos, tasks and automatic reports.

Written by of Inspect it.

See it on one of your own buildings

Run one real inspection with us and get the finished report before the call ends.

Book a free 15-minute demoSee the Inspect it app

Ready to make every inspection count?

Capture evidence on site, create professional reports with AI assistance and track every action to completion, all in one platform.

On this page